November 27, 2023
Description
MK3S+ LCD Cover with an additional Waveshare 7HP-CAPQLED display
Needs 5x 8mm M3 screws (in addition to the screws and nuts used for the original cover).
Fits these cables:
I included both split model with dovetail joint that fits onto MK3S+ bed, and the full model. To assemble the split version, put one part on top of the other and push them together until they lie flat. (You can add some superglue, but I didn't find that necessary.)
PETG, 0.2mm layers, 20% grid infill, supports are only needed for the dovetail joint
The display extends below the original printer feet so you'll need to set the printer on something like a concrete tile to raise it.
To connect HDMI and USB to the RPi, I recommend using my Einsy Base remix for better access.
I’m using my fork of OctoScreen that works with PrusaLink.
License:
GNU General Public License v2.0
7
the_ress
