CLACKBin Connector - no magnets, no problem Gridfinity Base

I had several small problems with clickfinity based baseplates like my CLICKBase as

• bins hard to insert/remove, especially if the bins are bigger

• creep changes the holding power

• slow to print

so i fixed those issues with this connector. Its fully compatible with standard gridfinity, is designed for half grid and should be easy to implement into your project :)

The solutions:

• reduce the amount of connectors engaged with the baseplate if the force is not needed

• prevent only the removal actively

• only print what is needed

• Additional: full halfgrid support

• Additional: custom infill for vase mode

This is now it works

1. You only print the bin (orange) and some amount of the the insert (purple)

2. Depending on how much holding force you want you insert as many inserts as you want. (minimal - 2 in a diagonal pattern, light - 2 diagonal in each corner, medium to strong - 4 per corner)

3. Use it, change it, do whatever you want

Cad:

https://cad.onshape.com/documents/3f42392574cd92e924c0847b/v/caa24f27833b9a03216a25e0/e/05c62b85d8b7ab64d920f466?renderMode=0&uiState=699dc72fe17f9b6687877c53

Changelog:

2026-02-26: added multiple versions like full 1x1 grid for easier replacement, sadly rebase doesnt work with it :(