Washer Collection - 2-10 mm, multiple sizes - 500 variants!

Not everyone knows how to CAD, so i made a generator to easily make different permutations of washers.

- Thickness: 0.5, 1, 2, 3, 4, 5 mm

- Inner diameter (hole): 2–10 mm (integer steps)

- Outer diameter: from (inner + 2) mm up to (2× inner + 2) mm

- Orientation: Flat side on the build plate (no supports).

- Layer height: 0.2 mm or finer recommended for thin (0.5 mm) washers.

- Material: PLA, PETG, or similar; dimensions are tuned for FDM.

This generator allows you to pretty much create any flat washer you neeed:

https://michalmietlinski.github.io/washer_generator/

Or from repository:
https://github.com/michalmietlinski/washer_generator

See also distances project:

Part of my collection for furniture:

https://www.printables.com/@MichaMietlins_755343/collections/3218237