Impact Wrench to Scissor Jack Adapter (17mm Socket Drive)

This is a high-strength 3D-printable adapter designed to bridge a 17mm socket wrench with a specific internal metal component. After several iterations, this model has been optimized for high torque resistance and a perfect fit.

Key Features

• Dual-End Connectivity: Features a precise 17.1mm hexagonal head (ideal for a 17.3mm internal socket) and a specialized top channel for the metal insert.

• Reinforced Joint: Uses a custom support ring (Torus) at the connection point to distribute stress and prevent shearing.

• Optimized Internal Geometry: Designed to be printed with specific reinforcement zones to handle mechanical loads.

Recommended Print Settings

To ensure this part doesn't snap under pressure, please follow these settings (especially for PETG):

• Material: PETG (Recommended for its interlayer adhesion and slight flexibility).

• Wall Loops: 6 (Essential for structural integrity).

• Infill: 60% Gyroid for the main body.

• Critical Zone Reinforcement (Modifier): * I highly recommend adding a Height Range Modifier between the heights of 23mm and 28mm.

  • Set Infill to 100% and Wall Loops to 8 within this range to solidify the hexagonal head connection.

• Top/Bottom Shells: 5 Layers.

Usage

Simply slide your 17mm socket over the hexagonal top and insert your metal tool into the bottom slot. This adapter is perfect for DIY repairs or custom tool setups where a standard adapter isn't available.