February 25, 2026
Description
A massive, gamma-powered green beast ready to dominate the gridiron! This detailed 3D printable figurine features a hulking, muscular character suited up as an American football player. He's decked out in a straining football uniform, oversized shoulder pads, a torn jersey, and ripped pants, barely containing his enormous frame. One hand grips a slightly crushed football while the other holds a cracked helmet. Posed in a dynamic mid-sprint action stance on a detailed base with cracked ground beneath his feet. Perfect as a desk display, tabletop gaming piece, or gift for fans of superheroes and football alike. Designed for both resin and FDM printing with minimal supports needed.
Recommended Print Settings:
FDM:
Layer Height: 0.12–0.16 mm for best detail
Infill: 10–15% (figurine is mostly solid shell)
Nozzle: 0.4 mm standard
Supports: Tree supports recommended (especially under arms, helmet, and football)
Material: PLA or PLA+ recommended
Speed: 40–50 mm/s for fine details
Scale: 100% prints at approximately 6–8 inches tall
Resin (SLA/MSLA):
Layer Height: 0.03–0.05 mm
Exposure: Per your resin manufacturer's guidelines
Supports: Light auto-supports, manually add to fingertips, helmet edges, and football
Hollowing: Recommended at 2 mm wall thickness with drain holes to save resin
Wash & Cure: Standard wash in IPA, cure 3–5 minutes under UV
Post-Processing Tips:
Light sanding for FDM layer lines
Prime with grey primer before painting
Recommended paints: Green skin, purple/white jersey, silver helmet
A matte or satin clear coat seals the paint nicely
License:
Creative Commons — Attribution — Noncommercial
iPrint3D
