Raspberry PI 5 case

I made this case for my raspberry pi 5, I don't have a case for it. Recommended print settings:

-0.12-0.16 layer height preffered (0.2 should work aswell but may need additional sanding of slanted parts and maybe snaps)

-15% gyroid infill

-3 walls

-print the part "RPI 5 lower case" with supports (only for the SD card cutout)

-the rest of the parts should NOT be printed with supports

-print the part "RPI 5 upper case" with 6-10% gyroid infill because it needs to flex more. Additionally, PETG printing is preferred as it's less brittle and flexes more than PLA.

-make sure your printer is well calibrated before starting the print