February 27, 2026
Description
Two box variant to put your hygro- and thermometer on table with 20- (table2) and 30-degrees (table1) angle and another two to hang it on the wall. Either with two 20x6x2 magnets or with a screw - one for 2 mm screw (wall1), one for 3.5 mm screw (wall2). The models are optimized for 0.2 mm layer height. Recommended at least 3 perimeters, no support needed, only be careful how to slice the top of the magnet holes.
The meter itself you can get from multiple sources:
From Prusa3D
From Aliexpress
Czech makers can buy it also here
I have tested all three sources, no issue.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
fotrik
