February 28, 2026
Description
This is a model i modded for Josh-3D's eurorack case which i kept as true to the original as i could.
I only had to modify the mounting holes and add a small cut out on the back.
These are mounts that let you attach to the side panels bottom screws, instead of the usual middle mount points.
which means that you can get away with printing only one mid section and the side panels
Use M3x16 bolts to attach stands to sides instead of the usual M3x12
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
willow2x
