4-Color AMS Majora’s Mask: High Detail, Easy Build 3D Printer File Image 1

4-Color AMS Majora’s Mask: High Detail, Easy Build 3D Printer File Image 2

4-Color AMS Majora’s Mask: High Detail, Easy Build 3D Printer File Image 3

4-Color AMS Majora’s Mask: High Detail, Easy Build 3D Printer File Image 4

4-Color AMS Majora’s Mask: High Detail, Easy Build 3D Printer File Image 5

4-Color AMS Majora’s Mask: High Detail, Easy Build 3D Printer File Thumbnail 1

4-Color AMS Majora’s Mask: High Detail, Easy Build 3D Printer File Thumbnail 2

4-Color AMS Majora’s Mask: High Detail, Easy Build 3D Printer File Thumbnail 3

4-Color AMS Majora’s Mask: High Detail, Easy Build

PenguinPrototypes

Description Comments Tags

Description

Ever since I got my Snapmaker U1 delivered, I have wanted to print the four-colour Majora's Mask model. However, I wasn't quite happy with the painting or the high wall thickness (a remnant of the model being intended as a keychain). One thing led to another, and I ended up spending a month adjusting the 3D model in Blender and painting the model by hand in OrcaSlicer.

The model is printed on five plates and needs to be glued together afterwards. I tried my best to make assembly as easy as possible. If you don't count waiting for the glue to dry, it took me about 30 minutes to assemble everything.

You can find more detailed information and an assembly guide further down in the description. Happy printing!

Features

4-Color AMS Compatible: Optimized for single AMS or toolchangers like the U1.
Higher Detail: Added extra geometry for colored lines (white, black, etc.) for sharper visuals.
Slimmer Design: Reduced wall thickness by 50% to save material and to better match the scale.
Easier Assembly:
- Notches on most interfaces for precise alignment.
- Pegs for secure gluing of the two main halves.
Wall-Mount Ready: Hidden wall holder geometry and a matching wall mount (invisible from the front).
Repainted: Entire model repainted due to geometry changes. This took a long time.

Filament required

Color	Snapmaker U1	Bambulab A1
Black	790g	940g
Yellow	200g	570g
Red	170g	410g
Purple	150g	320g
Orange	100g	280g
White	65g	265g
Light Green	30g	60g
Light Blue	25g	70g
Tan	25g	70g
Total	1555g	2985g

Time	65h or 3d 1h	200h or 8d 8h

Calculated using OrcaSlicer and BambuStudio.
I can only confirm the U1 data.

Printing

Use the provided .3mf as only it has the paint information. In the .3mf there is a fully assembled 3d model outside of any plate. It is there as a reference, don't use it to print! I used it to start painting, but it is missing some painting that i could only add after copying and splitting it apart.

The wall holder is an additional part, that is precisely aligned with the mask halves.

There is a .3mf file for Snapmaker Orca and for BambuStudio availabe.

Assembly

Step 1 Print out each plate and assemble all the parts as shown in the picture above. If there is any stringing, use a lighter or heat gun to remove it. Have superglue on hand.
Step 2 Press the pupil into the eye. No glue is required. Test the fit of the eyes to ensure you have the correct side and orientation. Apply superglue to the socket and press the eye into it. Repeat for the other side.
Step 3 Make sure you have all the yellow triangles and that they are in the correct sockets. Push the triangles into their sockets. No glue is required.
Step 4 Place the mask half onto its side. Glue the upper horn (tan colour) into place. Glue the green horn into place. Glue the red horn into place. Finally, glue the orange and blue horns into their respective places. Repeat for the other side.
Step 5 Let the halves sit for a while to let the glue dry.
Step 6 Place the mask halves on their backs. Add glue to all ten peg indents on one half. Insert all the pegs into their indents. Add glue to all ten peg indents on the other half. Add glue to the entire interface of the other half. Align the two halves using the pegs and press them together.