Field Case for Caddx Peanut Camera Kit

This is yet another organizing case for all the fiddly accessories which come with a Caddx Peanut (the lightweight drone-ready version of the Insta360 Go 2). It's a lot more compact than the original box and keeps things safe together in your hobby pack.

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

0.15mm typical

Infill:

Filament: ANY PLA ANY

Notes:

Post-Printing =============

This design relies on assembling the three layers and holding parts together with multiple kinds of fasteners.

The two hinges can be assembled with 1.75mm filament, or with a straightened paperclip.

The top lid layer is called the "roof" and accepts 4mm*2mm cylindrical magnets. Press the magnets in, being mindful of polarity when you match them on the middle "bed" layer.

The "bed" layer is the only layer that needs supports when printing, and probably only for the area which forms part of the recessed cable channel. On the top side, three more 4mm*2mm cylindrical magnets are meant to match polarity with those in the top "roof" layer. Underneath, you can choose to add two more magnets. Be careful to match the polarity with the internal magnets of the Peanut accessories in each bed space.

The "bed" and the final "floor" layers join together using 3 friction pins, STL included here. These also match the 3DK Toys pin and void construction, if you have some spares from their free Raven head or other models.

Category: R/C Vehicles