Yeshua / Jesus Figurine / Statuette (FDM Friendly / A1 mini compatible)

Files

• STL – universal (any slicer/printer)

• 3MF (Bambu/Orca) – ready-to-print starter profile (0.4 / 0.20 / tree supports)

Tools used

Created with MakerWorld-printU (https://makerworld.com/makerlab/printU)

Compatibility & scale

• 100% scale is fine for most printers.

Recommended FDM settings

• Nozzle: 0.4 mm

• Layer height: 0.16 mm (faster: 0.20 mm)

• Material: PLA

• Infill: 10–15% (Gyroid/Lightning works well)

• Walls: 2 (for a sturdier base: 3)

• Supports: ON – Tree supports, Touching build plate

• Brim: 5–8 mm (tall print → better stability)

Supports note

I recommend keeping supports build-plate only and avoiding supports on the face. If your slicer places supports on eyes/face, use “paint supports” to block them.

Makes wanted (thank you!)

I don’t have a printer yet, so I’m collecting community test prints to refine the final release (mainly supports + face detail).
If you print it, please post a Make + 1–3 photos and include:

• printer

• material

• layer height

• supports (yes/no) + type

Most helpful photos:

1. front, 2) back, 3) face close-up, 4) bottom of the base

I’ll feature the best prints in a “Community Prints” section (with credit).

Changelog

• v0.9 – initial release + community test prints (Makes)