3D Chameleon Auto Clippy For Neptune 4 with Beacon/Carto support and more

• print as described in SilencedFrost version + add support for servo holder pillar

• cover for screw

• pillar cosmetic fixes

• quick/dirty remixes of autoclippy servo holder (ECAS04 and UBBI versions)

• autoclippy support leg for better front screw alignment

• servo holder - put M3x6mm screw under blade holder from side

• servo holder - most of holes made easily printable (except two with thin wall around)

• servo holder - use M3 OD4.5 L4 heat-inserts. Alternatively you can drill 4.5mm hole and glue them in to avoid thin wall damage.

• added blade holder with tighter fit (blade width 8.5mm, thickness 0.45mm)

• added Servo_arm model. Print with 6 perimeters, 100% infill. Durability not tested yet!!

• more modifications may to come

Print oriented as is with organic tree supports... you can check screenshot

... work in progress ;-)

EDIT: 18.3.2026 - added model of "Servo_arm".
EDIT: 20.3.2026 - "Servo_arm" replaced with optimized design, preparing "howto set-up"
EDIT: 22.3.2026 - cutter_servo_v0.9.pdf guide
EDIT: 23.3.2026 - new "Servo_arm" with better angle setup and different screw type holes  + cutter_servo_v1.0.pdf guide
EDIT: 29.3.2026 - added V2, do not use V1 with printed arm (obsolete)