Elixir Vase – watertight FDM vase (no spiral/vase mode) A1 mini friendly

Files:

• STL – universal

• 3MF (Bambu/Orca) – ready “watertight” profile

Tools used:

Created with MakerWorld-Make My Vase (https://makerworld.com/makerlab/makeMyVase)

Recommended watertight settings:

• Nozzle: 0.4 mm

• Layer height: 0.20 mm

• Wall loops: 3

• Infill: 0%

• Top layers: 0

• Bottom layers: 8

• Line width (Outer/Inner): 0.48 mm

• Flow ratio: 1.03

• Outer wall speed: 80 mm/s

• Brim: 10 mm (outer only)

Material notes:

• PLA usually holds cold water, but avoid heat/sun/hot water.

• For long-term use and warmer environments: consider PETG.

• NOT FOOD-SAFE !!!

Leak test:
Fill with water and leave on a paper towel for 1–2 hours.
If micro-leaks appear: increase Flow +1% or temp +5°C, or use 4 walls.

Makes / photos:
If you print it, please post a Make + 1–3 photos and include: printer / material / layer height / watertight test result.