March 4, 2026
Description
Material: TPU/TPE.
Number of perimeters: 1-3 (for TPU A95) or 2-4 (for softer filaments). For optimal performance, for the "Side feet" model, use 1-2 perimeters up to 18 mm height and 3-6 perimeters above 18 mm.
Top layers: at least 5 (1 mm roof thickness).
Infill: gyroid, 8 - 15%.
The printing orientation provided on the slicer screenshot requires no supports (though, you still need your printer to be able to print at least 1 cm bridges in TPU).
After printing, cut out the lower bridging membrane on the side feet.
Theese feet were designed as a replacement for the hard rubber cast feet originally installed on the fan and should work with the original self-tapping screws.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Labrat
