Test model for transparent PLA printing – Remix of CNC Kitchen

This is a 3MF remix of the transparent test model originally created by CNC Kitchen.

The included 3MF files are configured for transparent PLA printing, with cooling disabled to improve light transmission and reduce internal haze.

I tested this setup using eSun Transparent PLA and achieved the results shown in the image above.

After the base configuration, I mainly adjusted the extrusion factor between 1.0 and 1.2 depending on the desired clarity.

If you plan to print transparent PLA, I recommend fine-tuning the extrusion factor within that range to dial in the optical result.