RuuviTag enclosure

Simple enclosure for RuuviTag sensor.

I needed a enclosure for outdoors so nobody could just grab it. I made this thing that has case and backcover.

It is a bit snug fit and be careful when placing RuuviTag sensor in the backcover.

Print tips

I printed with 0.4mm nozzle and 0.2mm print settings.

Infill does not really matter.

Back cover (backcover.stl)

• No need for supports.
• Print flat side down.

Enclosure (enclosure.stl)

• Needs support for builtplate only
• Print flat (with holes) side down

Category: Electronics