Sailor Moon Book Ends

This model features intricate details true to the Sailor Moon aesthetic. Please use extra care when removing supports around the hair, ribbons, and wand. Using needle-nose pliers and a hobby knife is highly recommended. If you have the capability, soluble supports will provide the best out-of-the-box experience

Layer Height0.16mmThe "Sweet Spot" for capturing facial details and hair flows.

Infill Density25% (Gyroid)Provides necessary weight and strength for holding books.

Wall Loops 3 - 4Increases durability and prevents the infill from "ghosting" through.

Top/Bottom Layers 5 Layers Ensures a smooth, professional finish on flat surfaces.

Print Speed40-60 mm/s Slow down for the character side to ensure crisp features.

Support Strategy (Crucial)

Because this model is "heavy labor" for support removal, I recommend these specific tweaks to prevent heartbreak (and broken wands!):

• Support Type: Tree Supports (Organic). They touch the model less and are much easier to "peel" away from delicate limbs.

• Support Interface: If you have a multi-material unit (like a Bambu AMS or Prusa MMU), use Soluble Support Material (PVA) or PETG as an interface for PLA prints. This allows the supports to pop off with zero scarring.

• Top Z Distance: If using standard supports, set this to 0.2mm - 0.24mm. It creates a slight gap that makes the bond "snap" rather than "tear."

• Support Density: Keep it low (around 10-15%) to make the support structures themselves less rigid.