Deathly Hallows inspired spool holder

Disclaimer: It's a holder that needs a 12mm socket to remove three screws in order to change the filament. It won't be for everybody but it's the one I choose to design.

I struggled to find the perfect spool holder so I did my own.

I printed two walls of the provided STL, that were inspired by the Deathly Hallows.

For the spool holder I just used this one: Universal Filament spool Holder by butchja

https://www.thingiverse.com/thing:2070272

To connect both walls I used some hardware:

1xM8x1000mm rod

12xM8 washers

12xM8 nuts

2x608 bearings

Each rod part was cut to 14cm, so you can buy three 14cm M8 bolts instead.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

Supports:

Resolution:

Infill:

Filament: Evolt PLA Black

Notes:

Category: 3D Printer Accessories