March 12, 2026
Description
This print profile includes two plates to suit your preferences:
Plate 1 (Double-Sided): Includes two halves designed to be easily glued together with cyanoacrylate (superglue). By using this method, you will only have color changes on the first two layers, saving you significant time and filament waste!
Plate 2 (Single-Sided): Perfect if you want a quick print with a textured finish on just one side and prefer not to glue anything.
To guarantee the best results and optimize material consumption, please follow these settings (which are already configured in the profile):
Orientation: Print face down (highly recommended on a textured plate).
Layer Height: 0.2 mm (Please do not change this setting).
Line Width: 0.5 mm.
Shells: 3 Top layers and 3 Bottom layers.
Color Ordering (⚠ Important): Always order the colors of the first layer from lightest to darkest. This will prevent darker filaments from bleeding into or staining the lighter areas.
Note: Multicolor .3mf file prepared in Bambu Studio. Fully compatible with OrcaSlicer. PrusaSlicer users can also open it to easily extract the colored geometry and assign their own printer profiles.
Discover ALL my models here! 👇
Check out my full collection of 3D designs on my main MakerWorld profile: https://makerworld.com/en/@Luzia3dstudio
🧵 Want to go the extra mile?
You can help me create and test new designs by joining my team! Support my work here:
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
11
Luzia3dstudio
