Fynlee Nameplate

I hope you like this nameplate I made! 

How to print (If you are new)

Press download and then chose the STL file, (If your printer takes STLS)

Then, open your printers app. (Mine is flashforge, so I open the flashforge app)

After that, create a new project. Then, press import and this file. Resize to your likings and then choose your infill. (I recommend gyroid) Press slice, then print. Select your printer and then boom! Hope it helped!

Edit: In the picture down below, I took of it when it printed, my filament was acting weird. If you run into this issue, change your heat settings, and it might help. I used size 80, so I might print it again in a bigger size. Because there were holes in the letters.