Armitron Compatible TPU Watch Band

Is it for you?

If you have the watch exact watch the photo, then yes. If you have a different one that looks the same, then measure all the critical distances to ensure that the holes line up. 

What is this?

A replacement band for a Armitron watch. This should replace the original silicone band. This should be printed in TPU or another flexible skin safe material. The installation method is the same with a stock watch band, with the older metal hardware is carried over. 

The original band is this, if this does not match your Armitron watch, then this is not the model for you. 

Parts: 

Non-3d printed parts that are required: 

• Watch Spring Bar Tool (amazon/watch store)

  • Required to remove the spring

• The original round watch spring (old watch should have this/amazon)

  • Required to hold the model in place

  • The spring for the band/body is a different size than the band/fork size

• The original watch buckle

  • Required to interface with the watch band

Assembly:

1. Use the "Watch Spring Bar Tool" to remove the original springs from the watch. Use the same tool to remove the buckle which has it's own spring. 

2. Print the part

3. Place the spring in the end of the printed part. Place one end of the spring in the watch, and use the tool to depress the spring and press down on the printed part.

4. Use the tool and depress the printed part to move the spring over the hold in the watch body. 

5. Pull the printed part to ensure that the spring is indeed in the hold

6. Use the tool (and some force) to remove the spring from belt on the end of the original watch band. 

7. Place the spring and "fork" into the printed part. 

8. Place the "C" shaped part of the watch buckle on one end of the spring.

9. Use the tool (and some force) to depress the spring and have the "C" part be connected to both ends of the spring. 

License: 

This model and files are licensed under GPLv3