Blitzwolf BW-SHP6 Programming Adapter

Disclaimer : Use at Your Own Risk ! 
Using and/or working with/on 110-230 voltages or device(s) can be deathly and/or cause fire. It is not worth the risk to yourself, your family and your home if you don't know exactly what you are doing.  If in doubt, contact a professional !
I don't take any responsibility nor liability, for any direct or indirect consequences, by using this adapter, for the installation or any tips, advice, videos, etc. given, nor at any referenced site.

Version 3 is here!

Improvements have been done on :

• Overall stability of the adapter
• The gap for the push button on the top has been extended so it doesn't get squeezed
• A recess for the Pogo pins, allowing more movement
• The PCB now clicks firmly into place

Drop me a like or share your make :-)

What better way than an adapter to ease the process of flashing several smart devices ?!!

I recently bought this small Blitzwolf BW-SHP6 smart socket

To integrate it more flexible into the smarthome, I needed to flash it with tasmota using this tutorial (link below)

but I didn't want the hassle of soldering and desoldering, so i came up with this adapter.

Print it, slide in the pogo-pins, secure with some super glue and follow this tutorial.

Hardware: https://www.blitzwolf.com/2300W-EU-WIFI-Smart-Socket-p-300.html https://www.aliexpress.com/item/Everlasting-100Pcs-Bag-Spring-Test-Probe-Pogo-Pin-P75-E2-Dia-1-3mm-Length-16-5mm/32920805035.html

Tutorials: https://github.com/arendst/Sonoff-Tasmota/wiki/BlitzWolf-SHP6 https://www.bastelbunker.de/gosund-sp111-mit-tasmota/

Alternatives:

They might also be sold under a few other names like Gosund (confirmed), Waza, Tridis, Jisusu (confirmed).

Since i don't own any of these, can someone confirm ?

Print Settings

Printer Brand:

Creality

Printer: 

Ender 2

Rafts:

Doesn't Matter

Supports: 

No

Resolution:

0.25

Infill: 

80%

Filament: Sunlu PLA

Category: Electronics