Hellfest Headphone Stand

This is simply a headphone stand topped with a plate made using the Hueforge software.

The base is secured at the bottom with 4 M4×12mm screws and 4 M4 Ø6 press-fit inserts, 5mm in length. The cross simply slots into the base, but can be secured with 2 screws and 2 inserts of the same dimensions as those used for the base.
The 2 drawers are identical and may require the base to be lightly sanded so they slide smoothly.

The Hueforge plate:

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 1.96mm and the Actual Thickness is 1.95998mm

#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#c12e1f PLA BambuLab Basic Red Transmission Distance: 4
#ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5
#f7e6de PLA BambuLab Basic Beige Transmission Distance: 8
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 6 unique filaments

Swap Instructions:
Start with Black
At layer #12 (0.6mm) swap to Blue Gray
At layer #15 (0.72mm) swap to Red
At layer #17 (0.8mm) swap to Pumpkin Orange
At layer #19 (0.88mm) swap to Beige
At layer #34 (1.48mm) swap to Jade White for the rest.

Once printed, the plate is simply held in place with double-sided tape.

Enjoy 🤘