7-Inch Irrigation Ring With 0.375-Inch Tube Inlet 3D Printer File Image 1

7-Inch Irrigation Ring With 0.375-Inch Tube Inlet 3D Printer File Image 2

7-Inch Irrigation Ring With 0.375-Inch Tube Inlet

Description

This is a 7-inch diameter irrigation ring designed to be used with 0.375-inch ID Tubing. Use a small ball valve to adjust the flow rate of the water through the ring. This works perfectly with my 2-Liter Soda Bottle To 0.25-Inch ID Tube Adapters and 2-Liter Soda Bottle Clamp Mount

A T-Stake Hold Down .stl file is included and should be used to secure the irrigation ring to the soil.

Tested to work with the following tubing:

Alpine 3/8" ID x 100 ft. Black Flexible Vinyl Tubing - https://amzn.to/3KgaNRN
JoyTube Food Grade Silicone Tubing 3/8" ID - https://amzn.to/3viVDVF
Clear Vinyl Tubing 3/8 Inch ID - https://amzn.to/3DKcPXC
DGZZI Barbed Ball Valve 3/8-Inch ID - https://amzn.to/3NU6H3K

*Note: As these models need to be printed watertight, and quite sturdy, I recommend printing with 6 perimeters, and 5-6 top and bottom layers.

*Note: Add a support enforcer in Prusa Slicer to support the tube inlet nub as pictured in the Support Enforcer Image located in the image gallery.

*Note: This post contains Amazon Affiliate links that support The Makers Workbench via a small commission from any sales they help generate.

Design File Included: .stl .f3d, step, .skp and obj files.

Follow The Makers Workbench on:

I have only tested this model using the default 0.20mm 100mm/s preset in Prusa Slic3r 2.3.3 with the following amendments made.

Print Settings