March 13, 2026
Description
This is a simple sleeve that makes the Bottle Jack Valve Knob designed by MazaaFIN fit snug on this type of “generic” german/european basement faucet.
The Bottle Jack Valve Knob needs to be scaled up to 200% and it should fit perfectly. My faucet valve measured around 8mm in diameter at the thickest part, and 39mm in length.
To mount it, you have to align the slit in the sleeve with one of the valve's handles, then kind of slide/press it on at an angle from the top. It may take (quite) a bit of force to get on, depending on what filament is used.
License:
Creative Commons — Attribution
halfbit
