Proto25 FPV Lowered camera mount

Remixed to be able to lower the height of the Proto25, because I use a AIO FC and a Walksnail V2 VTX (Thinner than O4 Pro)

From 28mm standoff , cut down to 23mm. 

The new height of 23mm is the same as the GPS,RX and antenna mount combined. The VTX is now screwed into the top plate instead of 3D printed holder. 

Note: This is a remix of a ProtoFPV STL - Not for commecial use / resale purposes. For more info click here. 

Filament: TPU