65mm Whoop Frame / 40mm Props / 21g / Micro Quad

THIS IS A 65mm MICRO WITH 40mm PROPS THAT WEIGHS 21g AWG!!!!!!!!!!!!!

Back in the day when Tiny Whoops hit the market the average weight was around 21-22g with brushed motors and 31mm props.
It's crazy to think in just a few years we can now build what feels almost like a full size quad with 40mm props and brushless motors in a micro form factor at the same weight for indoor flying/racing.

Remixed with one of my own designs to create the whoop that finally feels like a full size quad indoors. Very strong 4g WHOOP FRAME. The Mobula7 frame weighed in at 5.+g for comparison.

The frame Should be printed with NylonX, it's the strongest filament and has the best characteristics for quad frames. The battery holder was printed with TPU.
DRY YOUR FILAMENT BEFORE PRINTING!

The frame was printed with 1 single outline and partial infill with two processes in Simplify3D. The Simplify3D factory files can be downloaded from thingiverse.

PARTS LIST:
Tiny Whoop 0803 19000kv motors 8g

BetaFPV New F4 Flight controller (with power whip) 3g

RKH 40mm 3 Blade Props Clear 1mm shaft 2.5g

BetaFPV M01 AIO Camera 5.8G VTX 3g

TPU Battery Holder & M3 and M1.4 Nylon Plastic Hardware 1g

Nylon M1.4-4 motor screws (see pic) https://solidspot.com/shop/index.php?main\_page=product\_info&cPath=143\_216\_310\_333&products\_id=22160

Hardware:
4xM3x7mm for the prop guard
2xM3x4mm for the battery holder
2xM1.4 for the VTX
12xM1.4 for the motors

MY FINAL WEIGHT IS 21.5g AWG!! Remove the motor plugs and antenna shield for 21g strait up. I chose to keep the motor plugs for easy maintenance and the antenna shield for better reception.
The canopy if added for extra protection will only add 1.5g.

Print instructions

Category: R/C Vehicles