HAPPY EASTER SING WITH BUNNY, EGGS AND GRASS

I created this template with Maker Lab. You'll get the best result if you have an AMS printer (remember, you can change the colors to your liking), but I think you can print this greeting card even without AMS. Printing takes about 40 minutes, but remember, the preset template is large enough, so you can scale it (about 50%) to save time.

Recommended settings:

• PLA material

• Bed: 60°C or 70°C

• Nozzle: 220°C

• Layer height: 0.3 or 0.35 mm

• Speed: 200 mm/s or 300 mm/s 

Happy easter everyone.