March 17, 2026
Description
Print as oriented, 3 walls, 15% Cross Hatch infill, supports only under snaps and snap hook.
Remove 2 original screws from back and 2 original screws from bottom covers of MMX, attach holder and fasten it with 4x "cap head" M3x8 screws. Hook the top and snap the bottom snaps.
You can choose from 2 versions:
- output on top (on photo - tested)
- input on top (screw holes alignment not tested)
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
jimmy_cr
