Filament Bag Electric Vacuum Pump Holder (Skadis & Peg-Shelf Versions)

I bought a Filament Bag Electric Vacuum Pump (or as stated on the device, a Pumping Machine), it's marked as a JLB-Kseries model. My 3D model also has the added feature of a holder on the side for a sealing zip clip. Inserting the sealing zip clip narrow side down makes it east to remove, inserting it upside-down locks it tight in place.

Diameter for Pump is 52.40mm. Vent hole just in case the pump is inadvertently turned on.
Pin model is short profile, Skadis is a little larger to ensure the hooks are rigid and it's easy to print. 

The mounts on the rear come in 2 variants:
1) Ikea Skadis
2) Shelf Pegs (the holes on the side of a press for raising or lowering a shelf - photo examples included)

PLA, or better still PETG. I printed infill gyroid @ 20%. And I added 100% infill and support enforcers around the peg or Skadis hooks, depending on the chosen model.