Egg Holder / Storage + TPU Feet

Egg Holder

This egg holder is designed for 9 eggs, and each slot has a diameter of 40mm. But eggs a bit smaller and larger will still fit.

Dimensions: 150x150x30mm (without the feet)

Printing

To print the TPU feet, either use the "5 TPU feet.stl" or the "TPU feet.stl" and add it 5x in your slicer.

You could also print the feet in PLA, if you just want the aesthetic of them and don't mind it sliding a bit.

You could also don't print the feet at all and just use the base as is.

Assembly

To assemble the egg holder, just print all required parts, and put the TPU feet in the desired spots. For more strength, I would recommend putting a little drop of glue into the 5mm hole.