Weldinger TB-2500/Bosch PBD40 toolbox

Install the toolbox inside the main column and use the original lid.
The fit into the column may be a bit tight. If needed take a sandpaper and adjust the fit.
I put a plastic bag with allen wrenches and spare carbon brushes inside the box. So I can take things in and out easily.

I tested it with the Weldinger TB2500 drill press, but the Bosch PBD40 is nearly the same it should fit for this as well.

Print instructions

• print in PETg or similar

• print in given orientation, no supports needed

• depending how prominet your seams are, I recommend "paint on seams"
  paint it in the groove
  

Additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.