Flashforge AD5X Bambu Hotend Adapter (A1 & H2)

Simple adapter to install Bambu Lab A1 / H2 hotends on Flashforge Adventurer 5X. Prevents bambu hotend from moving vertically.

V2 - hole optimized

How-to

1. Print adapter for your bambu hotend. Use PETG/ABS/PA/PC etc.;

2. Remove stock AD5X heatsink;

3. Install adapter on bambu hotend;

4. Install bambu hotend normally. Use stock AD5X sock.

Troubleshooting

• High flow bambu hotends can't be installed on AD5X;

• Adapter must fit tightly between hotend and feeder. If not, reprint it with slightly higher scaling;

• If model is too tight, reprint it with positive X-Y contour compensation. Or just file excessive parts.