March 22, 2026
Description
This fixture will keep the gas burner controls of an Atwood CV-35BP RV cooktop in the off position. The fixture is easy to push on. It is readily removed by pressing the top of the knob as you pull the fixture off.
The burner knobs are 80mm center-to-center and approximately 52mm (2 in) diameter.
This was printed in PLA at 0.2mm STRUCTURAL and default slicer settings. No supports are needed when the top of the fixture is placed on the print bed.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
10
dnl42
