Giant Lego Unikitty (MMU)

Some bricks are already scaled up 1500%, some bricks are original size and need to be scaled up. The horn is not uploaded as a model because you must use the 3mf since it uses negative mesh modifiers.

You MUST print with 3% infill and 2 walls. The stud and receptacle are interference fit, The connection relies on the deflection of the wall when assembling.

Filaments I used: (Non Affiliate)

Fire:

https://www.amazon.com/dp/B0BM72LMQH?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1    (Red)

https://www.amazon.com/dp/B099K4DH2M?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1     (Yellow)

https://www.amazon.com/dp/B0F2GMWDHJ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1    (Dark Red)

Original:

https://www.amazon.com/dp/B0C6Q6MT3G?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1   (Pink)

https://www.amazon.com/dp/B0CX18XRG8?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1   (Magenta)

https://www.amazon.com/dp/B09WW5HJCV?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1   (Apple Sauce)

(Light blue foot color no longer available)

(Light yellow foot color no longer available)

https://www.amazon.com/dp/B0F6LFGRH7?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 (Horn and tail blue)