March 21, 2026
Description
A clean and elegant 2-part angel mold designed for making decorative soaps or candles.
!! IMPORTANT !! THE STL FILE IS NOT SPLIT, YOU WOULD NEED TO SPLIT IT IN HALF AND ADD CONECCTORS (ALL THIS CAN BE DONE IN YOUR SLICER) A READY TO PRINT FILE IS INCLUDED, ALREADY SPLIT WITH CONECTORS.
This model features a simple two-piece design that is easy to print and assemble. The angel shape includes soft details on the wings and robe, creating a nice finished look in the final cast piece.
Use clamps, rubber bands, or magnets to keep both halves together during casting.
Apply a mold release agent if needed for easier demolding.
Ideal for:
Decorative soap casting
Candle making
Craft projects
Small gift production
Recommended settings:
Layer height: Adptative
Walls/perimeters: 3–4
Top/Bottom layers: 4–5
Infill: 15–25%
Supports: Yes (Depends on orientation)
Brim: Optional
Material: PETG, ABS, PLA +
Orientation: Flat on the back side
Printing tips:
Print both halves face-up for best detail (or Standing normal)
Use a fine layer height for cleaner surface finish
Make sure the inner cavity is smooth for easier demolding
PETG is recommended if you want better heat resistance
Important:
Depending on the material and temperature used, this model may work best as a mold body or mold master. If you plan to use hot wax, choose a material with better heat resistance than PLA when needed.
If you print and use this model, I’d really appreciate your make and feedback.
Follow me on IG @8PRINTS.MX
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
8prints.mx
