Surface-Mounted Adapter Schneider Electric ASFORA

As I was renovating, I accidently bought flush mounted switches. I considered returning them but all the surface mounted were either ugly or very expensive. I decided that i could just print it. 

 Unfortantly, the brand I bought was not standard Gira 55 so I had to break out Blender and modelise it too. 

I, therefore, present you my custom-designed surface-mounted adapter for Schneider Electric ASFORA series, allowing you to install ASFORA switches and sockets on walls without the need for flush mounting.

Note: I use m3x4.2mm copper inserts and m3 screws for holding the switch to the casing.

Notes:

• This is a third-party, independently designed accessory and is not an official Schneider Electric product

• Designed for standard ASFORA series modules; please verify compatibility before installation

• Electrical installation should be performed according to local regulations and by a qualified professional if required - use at your own risk.