Rc Car Hub Adapter (6mm hex to 12mm hex)

This is a simple model to adapt 6mm hex hubs to 12mm hex on RC cars. In my case, I wanted to get some upgrade wheels, but I could only find 12mm hex wheels. These can be printed easily at 100% infill.

Print Settings:

Layer Height: 0.2mm (That's what I printed mine at, but it doesn't matter really)

Infill: 100% (For strength)

Brim: Optional

Note:

This was designed around the Hyper Toy Co HYP-24-08-10.

Feel free to comment what you like about it, or tell me if you had any problems!