March 22, 2026
Description
Circular and Straight-line droop guages for measuring droop on 1:10 RC on-road cars.
In all honesty, needs ironing turned on to get a good enough finish to be useable. Also you should measure your print with calipers and scale up/down appropriately to get the correct height.
Circular guage is between 14mm - 17mm. Straight-line guage is between 14mm - 16mm. Use 10mm blocks under chassis.
Printed in PLA 1.75mm at 0.2mm layer height, Ironing turned on.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
joek1973
