Pando58 case

3D printable case for the open source Pando58 keyboard.

This replaces the default FR4 bottom piece. The assembled keyboard uses: switch plate + PCB + bottom case (this piece).

The original FreeCAD design file can be found on GitHub if modifications need to be made.

Note: This model represents the LEFT side only. To print the right side, mirror the model in your slicer.

Bill of Materials

• 20 x M2 4mm screws (10 per half)

• 10 x M2 8mm brass standoffs (5 per half)

• 8 x 3M SJ5302 bumpons (4 per half)

The Pando58 keyboard also comes in a build-able kit that is available on Etsy.