March 23, 2026
Description
Hey!
I started off with high hopes.... and this is what you get...
there is a picture of the exploded drawing of how it goes together....Â
Main problem is you need a usb extension lead and a cheap usb light (24mm dia from ali express)
the usb lamp stops the girl sliding off the hand (She is really quite bright)
I originally wanted a 1 piece model but if you do not have a colour 3d printer, the hand comes out the same colour as the the girl. there was no way to separate the colours by layer.......
plan b...
a modular lamp where we print all the bits seperately---
it is best if you find a thin cable usb extension as my thick one tries to tip the lamp over
if you just want the model in 2 colours,the solid propfile is tipped with two pins to make the correct angle to change colours and make the base a different colour.(this can only be used as a model.if you look in the pictures the 60mm lamp for this one is not able to light the girl.there is too much material between but it is an easier model to print) the pictures for all in one are the last ones - as you can see, this model does not work as a lamp, it just lights up a bit of the base!!!
the pictures that are just 2 colours are the solid prop file that will print in one go!
usb led lights from amazonÂ
  https://www.amazon.de/-/en/dp/B0BFKSKSWR?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
extension lead from amazon Â
License:
Creative Commons — Public Domain
Matt
