April 8, 2022
Description
Another variation on the tensegrity tables that everyone has been printing. In general, most of them I've seen have been interesting, but really, really ugly! This is attempt to make something more attractive looking.
see: https://www.youtube.com/watch?v=R_i-F6Rvdrw
Printed, refined, reprinted. New files uploaded (I think.... Thingiverse isn't what it used to be, hard to tell what it's doing now most of the time!).
Now there are places to put self-tapping screws to clamp nylon line for adjusting and tightening the tensioning strings. Tie beads (or #2 or M2 nuts) to the line where it is to terminate in the "arc" pieces, the beads then get pulled and hide down in the pocketed holes. The screws hide down inside the little bumps (the ones that don't have arcs sprouting from them!)
Resolution:
0.4mm nozzle, 0.24height
Infill:
25%
Filament:
any PLA (or PETG)
Notes:
Glue the arcs to the table top/bottoms with gel type superglue. Make sure the loops are around each other before gluing. The lines are 0.45mm dia nylon "Invisible Thread String for Hanging Christmas Ornaments, Bracelet Making, Sew Hobby, Clear Beading Thread"
https://www.amazon.com/gp/product/B07JWG3LMS/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
I used some 2mm "see spacer beads" tied on the thread, but the pockets in the arc pieces should be large enough to use #2 or M2 sized machine screw nuts instead.
Do the line that goes from loop-to-loop first, it sets the spacing for all of them.
License:
Creative Commons — Attribution
bwaslo
