April 8, 2022
Description
This is a replica of the classic figure from the box Wizards (sometimes Wizards and Illusionists) number 2001.
( http://www.cs.cmu.edu/~tpope/sol/grenadier/images/2001.jpg
)
The model is a 2-part model, with a replaceable spell effect option. The original box came with a spectral hand and a lion head. I have included files for both. In addition, just for fun I added a few more spell options for you to print and play with.
The Porsche 911 is a remix of https://www.thingiverse.com/thing:2946486.
The shark is a remix of https://www.thingiverse.com/thing:2841664.
Baby Yoda is a remix of https://www.thingiverse.com/thing:4046780.
Thanks to Multiverse3DDesigns, zacleung, and stunner2211.
I included a file of just the mounting post in case you want to create your own. Let me know what you come up with!
The post holds the options in the smoke cloud about as well as the original model, which is to say not that well. If you print in PLA, dunking the post in hot water for a few seconds will allow it to mold to the hole and hold better. Or, a bit of putty in the hole works well.
Sorry the sizing is not consistent. I'm still figuring out how to properly scale things in Blender. Just follow the printing instructions to match the size of the original.
Printer Brand:
Monoprice
Printer:
Maker Ultimate
Rafts:
No
Supports:
Yes
Resolution:
0.1mm
Infill:
25%
Filament: various PLA various
Notes:
To match the size of the original, print the wizard at 230%
Use 25% density supports
Print the hand at 120%. Lay flat 90 degrees, palm down,
with supports
Print the lion head at 190%, 90 degrees flat and rotated right-side up.
The Shark is best at 150%
Yoda prints at 200%
The car at about 150%
Be careful removing support material as the wheel come off easily.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
engineer27
