April 8, 2022
Description
V-Tail quad-copter frame using the Hubsan X4 board. All motors were upgraded to 8.5mm coreless motors. It has a very sharp and responsive Yaw control.
Stock props can provide enough lift but only at 80% throttle. Exchanging the back stock props with bigger ones will improve the performance. My current setup is listed below:
Additional Information:
Rafts:
No
Supports:
Yes
Infill:
30%
Notes:
PET+ works the best for it's durability and can survive the most intense crashes.
ABS and PLA can work but can't survive that many crashesV-tail legs need to be printed separately and glued to the bottom of the frame.
License:
Creative Commons — Attribution — Noncommercial
8
Gyronictonic
