March 29, 2026
Description
This is a custom-designed mount to securely attach your Deeper Sonar (Pro+ or CHIRP+) to the FLTB-5 float tube.
Fishing with a Deeper on a float tube can be tricky without a dedicated arm. This mount is designed to be compact, sturdy, and perfectly aligned with the FLTB-5 straps or accessory rails. It uses the standard 1/4"-20 UNC (Photo Tripod) thread, ensuring a perfect fit without damaging your sonar's casing.
Technical Specifications
Thread Type: 1/4"-20 UNC (Standard Tripod Mount). Do NOT use M5 or M6 bolts.
Compatibility: Optimized for FLTB-5, but works with most belly boats using similar strap systems.
Design: Reinforced base to handle water resistance while moving.
Recommended Print Settings
Important: Do NOT use PLA. It will soften in the sun and might snap in the water.
Material: PETG, ASA, or ABS (UV and water resistant).
Perimeters (Walls): 4.
Infill: 40% (Gyroid or Honeycomb for structural integrity).
Layer Height: 0.2mm.
Supports: Required
Hardware Needed
1/4"-20 UNC Screw: Standard camera/tripod mounting bolt.
50mm Wide Strap (5cm): One heavy-duty strap to wrap around the float tube tube (standard 2-inch webbing works perfectly).
License:
Creative Commons — Attribution — Noncommercial
6
Migouille
