Printrbot LC side fan mount

A modified laser cut part #291 to mount a 40mm cooling fan. The fan can be adjusted.

Will work with a Printrbot Plus

Solidworks 2012 available below.

Instructions

1. Print and clean up the mounting holes. I set the holes to be 3.4mm in diameter so a M3 or 6/32 will fit.
2. Capture nut space will need to be cleaned up as well in order for the nuts to fit.
3. Replace part #291
4. Optional: If the mount is too low, you can drill another hole higher than the original.

Category: 3D Printer Parts