Mount for low fender on the BTM Wildfire

Created this mount for increased splashwater-protection as the original mounting situtation for the fender did not provide enough.

This will hold the fender just above the tire as it is held down on the movable part of the fork and will consequently move with the tire.

BOM:

3xM8x250 threaded rod

1xM8x245 threaded rod

20xM8 nuts

8xM8 washers

4xM8x30 cylindrical head

2x187,5mm pneumatic pipe with >8mm ID

2x47,5mm pneumatic pipe with >8mm ID

1xFender(i took the original one which already had 4 fitting holes)

4xM6x10 flat head screws

4xM6 nuts

This is at the moment only for the 33mm variant of the fork and not yet for the new 37mm version.