Hornady Bullet Feeder Lock and Load Ammo Plant

I have had issues with the metal flexible bullet tube getting dislodged from the seating die. When this happens I tend to get a lap full of bullets.

I have seen other 3d adapters that fit this need, but there seems to be a little something off and bullets would hang up on a lip on the inside of various adapters. or tolerances would be too loose and the adapter wouldn't stay in place.

This adapter is designed to fit snugly around the metal bullet feeder tube so that it won't accidently release. There are notches in the body for visibility so that you can see when you are getting low and need to switch on the noisy beast known as the bullet feeder. The lower part of the adapter is designed to fit snugly into the Hornady bullet feeder die.

With a snug fit, you might ask how do I change over to a different caliber. The solution is simple by rotating the flexible metal bullet feeder tube either clockwise or counter-clockwise you can constrict the metal spring and it should feed easier.

Category: Sport & Outdoors