AEG/Ridgid to Parkside adapter

Print standing with 15% grid infill, organic support everywhere.

Print all the parts, then insert brass press-in nuts as seen on the pictures.

Cut wires to 60mm lenght.

Setup Parkside connector like this

Just place Parkside connector there, it will stay locket in place when AEG plate is mounted.

Hardware you need for this print.

• 1 x red cord 1.5 mm² x 60 mm (~2,3/8") length

• 1 x black cord 1.5 mm² x 60 mm (~2,3/8") length

• 1 x resistor 10kΩ

• 5 x 6.3mm (~1/4") automotive car splices wire terminal 926965-1

• 3 x insert brass press-in nuts M3*4*5 mm

• 2 x insert brass press-in nuts M3*5*5 mm

• 2 x M3 steel hex socket head cap screw M3x20 mm

• 1 x M3 steel hex socket head cap screw M3x16 mm

• 2 x M3 steel hex socket head cap screw M3x8 mm

Google "automotive car splices wire terminal 926965-1" or the picture below to find this part on the Internetz. 

Brass inserts and hex socket head cap screws, just order kits like the ones below.