ZOHD Nano Talon EVO VTX and SMA Antenna Mount

This is a complete redesign of Beetlebeetle's original ZOHD Nano Talon Evo VTX and Antenna Mount. My remix supports any conventional 36mm² size (30.5mm² mounting holes) video transmitter, and a passthrough for a conventional non-right-angle SMA antenna panel mount connector. I've also made a few improvements to the design, which you can find more details on below.

VTX Mount

The VTX mount is designed to be glued to the underside of the nose canopy lid, right behind the air inlet, to provide adequate airflow to the VTX. There is also room under the mount to attach a heatsink to the bottom of the VTX directly in the path of airflow. The VTX is attached to the print with 4x M3x5mm screws.

Antenna Passthrough

The antenna passthrough is designed to be glued in place inside a ~15x15mm square cutout in the nose canopy lid. Then the SMA panel mount connector is placed inside and tightened.

I've included STEP and Fusion 360 Archive files to easily modify the design if needed.

Thanks, Beetlebeetle, for the original design!

EDIT: I've also added a slightly modified variant for the AKK RaceRanger VTX. It has a few cutouts for its large bottom side heatsink.

My Other ZOHD Nano Talon EVO Designs: